Epilady Rolleg wax hair removal kit is relieves you of the inconvenient and messy use of liquid wax. We offer you a safer, cleaner hair-removal system in the comfort and convenience of your bedroom.
Epilady Rolleg Wax Hair Removal Kit is innovative heat-control system self-limits to the required temperature, prevents overheating - no matter how long you leave it on the heating base - and protects you from the danger of burns. A clean and carefree experience - place a wax strip on your leg and gently pass the heated roller over the paper until warmed. The warmed wax will adhere to the hair. After briskly removing the strip, you will see the incredibly smooth results.
Epilady Rolleg Wax Hair Removal Kit Using Tips:
- Treatment should take place not less than 2 hours after bathing.
- Connect the device to the electric current (230V or 120V). The red bulb will light up and indicate that the device is switch on.
- Allow the device to heat up for about 6 minutes.
- Roll the hot roller over the wax strip before opening it.
- Separate the two halves of the wax strip, smooth one of the strips over the area to be treated. Roll the hot roller over the wax strip until the wax is warm and adheres well to the leg.
- After the wax has cooled, pull the strip rapidly off, against the direction of hair growth.
- Usually no surplus wax remains on the skin. If any wax residues are left, remove them with cleansing wipes.
- The wax strips may be re-used, as you see fit.
- To preserve the temperature of the roller, return it to the heating base after each use.
- At the end of use disconnect the device from the electric current.
- If necessary, soothe the treated area with a suitable cream.
You may also like
|
